Complete Bolt On ITB Kit (Cathedral Port) Open Trumpet For Gen3 GM LS3 Series V8 Engines 完整專用直上 8 喉直噴進氣系統 (LS3, 開放式)

This is a complete bolt on kit that will fit ALL LS series GM / Chevrolet engines with cathedral port heads.

Maintains all standard equipment such as TPS, IAC, fuel rail and injectors. Also comes with high mounted fuel rail option to run secondary injectors or NOS etc.

Our testing has shown this kit to produce peak gains of up to 45rwHp over the standard intake on a completely stock engine, with NO loss to mid range torque or power. With proper setup and tuning this drives just like an oem tuned vehicle with perfect driveability, starting and idle control.

When coupled with a performance cam we have seen power exceed 400Whp (300= WKw) on otherwise stock 5.7L engine.

Note this kit does NOT include any airbox / scoop or backing plate, see our other listing for kits that include a carbon fiber Plenum/ Airbox

• 50+whp Incrase Of Oem Intake
• Smooth Low-Rpm Divability – Some Customers Have Been Daily Driving For 3 years+
• 7 Inch (180mm) Manifold Runner Length For Improved Torque
• Amazing Deep Induction Sound.
• Nitrous Compatibility Via Top Mount Ports. Cans Also Be Used For E85 or Race Fuel For Additinal Power.
• 51mm Throttle Body Openings x8 For Unmatched Air Flow Over Any Other Intake. 

Comes with Low and High mount injector port options to allow nitrous or different fuel rail heights. The high mount option provided impressive increased gains when using E85 (100 Octane) fuel. 

Included in the kit : 

• Complete Bolt-On ITB Kit.
  • 8x Manifold Runners & Trumpets.
  • 8x Pre-Assembled Throttle Bodies.
  • Linkage Mechanism & Adjuster Screws
  • Vacuum Block, Hose Fittings and Silicone Hose.
• 2x Aluminium Injector Rails for High-Mount Ports
• 8x Injector Plugs to block off unused ports. 

OPTIONAL :

• Optional : Carbon Plenum & Backing Plate (Trumpets include flanges for backing plate)
• Optional : Drive-By-Wire actuator. (Kit will be setup for DBW and not cable throttle)
• Optional upon request : Base tuning file to suit OEM ECU with HPTuners (Additional tuning recommended) 

This is a complete kit that utilises the factory equipment such as TPS, IAC, Fuel Rail and Fuel Injectors and ECU. 

SPECIFICATION : 

• All throttle bodies and linkage parts are precision CNC machined from 6061 Billet Aluminium. 
• Center-less ground 12L14 Steel Shafts with Sealed Ball Bearings
• High Precisions 7-Degree Brass throttle plates
• 51mm throttles @ 469CFM flow each. 
• Spun Aluminium Velocity stacks with parabolic rolled edge for maximum flow with minimal turbulance. 

TE Motorsport (by TAG Engineering) Racing Parts 購物須知!

您的訂單在完成付款之前不會進行備貨或是出貨、且不接受任何非正式的書面或是口頭訂單，標示之售價僅限於台灣，非台灣地區如使用 PayPal 支付需額外增加 7% 手續費以及額外的國際運費 (詳細運費請透過 Support 聯絡客服)。

除了特定套裝服務註明包含工資或是調教之外，其餘所有訂價皆不包含安裝或是調整工資 (如需由 TE Motorsport 施工則費用另計)。

台灣區目前僅支持 ATM 轉帳付款，關於我們的支付帳號請見 : https://www.tag-parts.com/my-account/

商品運送：

TE Motorsport 所販售之產品皆在歐洲(英國、芬蘭、波蘭、德國、澳洲)等地製造以及測試、銷售涵蓋世界各地，故所有產品庫存皆以我們澳洲以及芬蘭兩個集貨倉儲為主、並非所有產品皆有現貨在台灣，每項零件出貨日程以及到貨時間有所不同，我們無法保證在訂購（完成付款）後隔天就能完成出貨，部分商品可能需要 14-21 (或更長時間) 的工作天進行生產或是國際運送、如遇缺貨等待生產會另行告知，我們會盡最大努力讓您儘快收到訂購的商品。

付款政策：

• 我們銷售之所有產品均採付款後出貨，並無貨到付款或是超商取貨付款，預購以及特殊商品皆以付款日為準，商品在下單後保留三日，如未完成付款系統將自動取消其訂單。
• For international orders, Unless there are special circumstances, we only use international transfers fow now. If you need to use Paypal for payment, an additional 7% handling fee is required. Due to common fraud and malicious refund incidents, Please CONTACT our service staff get the PayPal payment method.

退換貨政策：

• 所有提供之零件以及代訂作業皆屬客製化服務，商品存在獨特性以及非通用性，不適用七天鑑賞期條款。
• 我們保障每一位消費者的權益，但請注意 "我們只對於商品本身非人為因素損壞做出保固"。不接受任何其他理由退換貨(包括購買錯誤)，購買前請先確實確認車款以及對應形式。

請注意：由於跨國訂購會產生除商品本身以外的費用 (如國際運費、關稅以及手續費)，並且受限於原供應商訂購條款限制，故任何跨國代訂服務當款項支付完成且訂單成立後不接受任何原因退貨 (如遇產品本身瑕疵問題我們會協助與原供應商協調更換事宜)，如無法接受請勿委託訂購。

退款政策：

當進入退款作業時，您需要先確認商品包裝完整無使用痕跡，並且將商品寄回 TE Motorsport 進行檢查，我們會在確認商品符合退款條件後依照下列計算方式在 3 個工作日內會將款項退回您訂購帳號所指定之銀行帳戶。

• 當訂單因特殊原因必須進入 “損壞性保固” 以外的退貨作業時，您必須要為此負擔物品的運費 (代訂物品的國際運費, 或是台灣當地運費)、以及商品金額的 20% 作為違約損失賠償手續費。 (Ex. 如果商品為 1,000 元，運費為 80 元，那麼將會退回 1,000 – 200 – 80 = 720 元。)

其他安裝上或是非商品本身的問題由客戶自行承擔。產品出現任何問題請第一時間與客服人員聯絡，任何未經授權之商品或是行為皆無法受理保固服務。

如有任何疑問，歡迎透過以下管道與我們聯絡。

• E-Mail 支援 Support
• TAG Engineering FaceBook：https://www.facebook.com/tagengineering
• RHD Engineering FaceBook：https://www.facebook.com/rhd.taiwan
• ECU Master Taiwan Facebook : https://www.facebook.com/ecumaster.tw
• Intrax Racing Suspension Taiwan Facebook : https://www.facebook.com/Intraxracing.tw/